J2 Aerial Cable Lasher, modified for 1/2 in. 25M strand
86072
The Model J2 Cable Lasher is used to lash a Single Aerial cable or numerous cables to a Supporting strand or to an existing lashed cable with stainless Steel Lashing Wire.
- Will lash any Single or multiple Aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 1/2 in. (12.7mm).
- Consists of a rotating drum Supported on a carriage that provides the Mounting for a driving mechanism, cable Lifters, cable and strand rollers
- Each of two recessed magazines will hold a 1200 ft. coil of .045 in. (365m of 1.1mm Wire) Lashing Wire . The Lashing Wire is fully recessed and Covered by a gate.
- Features a fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel
- J2 Lashers make overLashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable
- Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break
- Constructed with heat-treated, plated Steel, stainless Steel, brass and aluminum components. Contains sealed and oiless bearings to minimize maintenance and assure durability.
- Pre-drilled and tapped at the factory for Mounting of the Lasher Guard or “halo”. For use when Lashing in overgrown areas.
| P/N | Description | Wire Dia | Weight |
| 86071 | J2 Aerial Cable Lasher, Modified for 1/2 in. 25M Strand | .038 -.045 | 46 lbs. (20.9kgs) |
| 03165 | Bridle Rope Assembly only | 3 lbs. (1.4kg) | |
| 08189 | Chest only (Note: J2 Cable Lasher w/Chest Shipping Weight: 65 lbs. (29.6kgs)) | 19 lbs. (8.6kgs) | |
| 70190 | Towing Lanyard 35 ft. (250 lbs. WLL) (optional) | 6 lbs. (2.7kgs) | |
| 70012 | Lasher Guard "Halo" (optional) | 3 lbs. (1.4kg) | |
| 70014 | Lasher Guard Template Tool (Needed to install Halo on older units) | 1 lbs. (.45kg) | |
| 70467 | Cable Lasher Parallel Pull Accessory (optional) | 15.7 lbs. (7.2kg) |
