J2 Aerial Cable Lasher, modified for 0.065 in. Lashing Wire
86071
The Model J2 Cable Lasher is used to lash a Single Aerial cable or numerous cables to a Supporting strand or to an existing lashed cable with stainless Steel Lashing Wire.
Note: This model J2 lasher works ideally with .065 wire using larger snubbing pulleys but will also work with .038 and .045 diameter wire. If using the smaller wire regularly, we recommend changing the snubbing pulleys to match the wire size for the best performance. Order Snubbing Pulley Kit # 33362.
- Will lash any Single or multiple Aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm).
- Consists of a rotating drum Supported on a carriage that provides the Mounting for a driving mechanism, cable Lifters, cable and strand rollers
- Each of two recessed magazines will hold a 1200 ft. coil of .045 in. (365m of 1.1mm Wire) Lashing Wire (or 450 ft. of .065 in.). The Lashing Wire is fully recessed and Covered by a gate.
- Features a fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel
- J2 Lashers make overLashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable
- Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break
- Constructed with heat-treated, plated Steel, stainless Steel, brass and aluminum components. Contains sealed and oiless bearings to minimize maintenance and assure durability.
- Pre-drilled and tapped at the factory for Mounting of the Lasher Guard or “halo”. For use when Lashing in overgrown areas.
| P/N | Description | Wire Dia | Weight |
| 86071 | J2 Cable Lasher for .065 wire | .065 | 46 lbs. (20.9kgs) |
| 03165 | Bridle Rope Assembly only | 3 lbs. (1.4kg) | |
| 08189 | Chest only (Note: J2 Cable Lasher w/Chest Shipping Weight: 65 lbs. (29.6kgs)) | 19 lbs. (8.6kgs) | |
| 70190 | Towing Lanyard 35 ft. (250 lbs. WLL) (optional) | 6 lbs. (2.7kgs) | |
| 70012 | Lasher Guard "Halo" (optional) | 3 lbs. (1.4kg) | |
| 70014 | Lasher Guard Template Tool (Needed to install Halo on older units) | 1 lbs. (.45kg) | |
| 70467 | Cable Lasher Parallel Pull Accessory (optional) | 15.7 lbs. (7.2kg) | |
| 71532 | .065 x 450 ft. Alloy 430 Stainless Steel Lashing Wire | 7.5 lbs. (3.4kg) | |
| 33362 | Snubbing Pulley Kit | 1 lbs. (.45kg) |
