 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
Rope Guide Roller
P/N 88801
Used to guide pulling lines in and out of manholes, handholes and
junction boxes to avoid damage to the rope.
P/N 70625
The Overhead Line Winch has been designed to provide a compact, transportable unit for overhead line stringing work.
<More Info>
P/N 70613The GMP Cable Pony winch offers the constant pulling tension of a double capstan drive and the flexibility of a direct drive drum in one machine.
more info
Braked Drum Stand
P/N 74540
Drum lifting is achieved with two hand operated hydraulic jacks. An adjustable band brake provides controlled cable tensioning.
more info
ADSS - All-dielectric Self-supporting Optical Cable Installation
Tools needed to efficiently install and maintain ADSS cable
more info
Trailer Mounted Cable Fleeter 1/2" x 10,000'
P/N 89016
The Fleeter replaces the manual method of “figure eighting” cable, and provides protection and security for the cable.
more info
P/N 88900
With GMP’s Trailer Mounted Powered Duct Rod Pusher, hydraulically powers the trailer mounted 1200 ft. capacity,1/2" duct rodder in and out of conduits. One man operation with minimal setup time.
more info
Find, follow and map detectable duct rod and copper based cables that are located in nonmetallic duct.The RD7000+ is ergonomically designed to deliver a light weight, energy efficient and exceptionally well balanced locator.
more info
P/N 89300
The new AirStream cable blowing machine has been designed to maximize protection for micro cables with a compliant double drive concept, backed by the latest technology in servo controls to provide precise control of torque and speed.
more info
P/N 71140 to 71143
The Heavy Duty Connector connects two items with lugs or wire loop fittings. Typical application is to connect a wire mesh pulling grip to the pulling line.
more info
P/N 70427
The new GMP Power Duct Slitter, designed to be both rugged and economical. Based on a proven design, our slitter will save you both time and effort.
more info
Corner Blocks - 45° and 90°
P/N 70438 and 70439
These rugged and lightweight corner blocks are used to guide cable and evenly distribute the load on the cable when pulling around corners.
more info
P/N 89004
With GMP’s Powered Duct Rod Pusher and a 1/2” GMP Duct Rodder, the job of placing pulling lines or fiber cables just got that much easier with less personnel in old or occupied conduits.
more info
P/N 70605
The Trailer Mounted Fiber Optic Puller has been designed to exceed the requirements of installing cables, employing a 32" diameter single capstan to provide a controlled force to the pulling rope or tape.
more info
Tel: +1.215.357.5500 Fax: +1.215.357.6216 Email: info@GMPtools.com
© 2011 General Machine Products Co., Inc
